A VERY SHAMEFUL FACT ABOUT CHINA

It's the shameful secret that those in the international fur trade do their best to hide.

Cats and dogs in China – more than 2 million individual animals this year alone – will be killed for their fur. Animals like the ones we share our homes with as beloved family members are being routinely abused and slaughtered for their fur.
This cold fact has been witnessed repeatedly by investigators from PETA Asia and independent animal protection organisations around the world.

PETA is leading the campaign against the bloody fur industry. Please support our efforts for all animals today with a special gift to bolster our life-saving work.
The animals suffering in these markets can't tell their own story, so I'll relay to you just some of what PETA Asia investigators have documented:
"Workers stuffed hundreds of terrified animals into cages to make the trip to the Chinese animal markets. No food or water was provided." "The cages were packed so full that the animals couldn't move inside. And dying or dead animals were packed in with the living." "When they arrived at the market, the cages were tossed 10 feet from the tops of the trucks to ground below, shattering the bones of the fearful animals inside." "At the market, the killing methods used shocked even our most seasoned investigators – bludgeoning and even skinning the animals while they were still alive!"

All these horrors take place so that someone can have a fur coat or fur trim on a hat. It's outrageous and must be stopped.

The skins of these animals find their way to the international clothing retail markets and are sometimes misleadingly labelled as anything from "Asian jackal" to "rabbit".


I know that it's hard to read about this cruelty. But I want you to know how you can be a part of ending this misery – by supporting PETA's work to save these and other animals from being abused in the name of a violent, greedy industry built on suffering. Please send a special gift to help fund PETA's ongoing campaigns to stop the suffering of animals in China and around the world.
We're leading eye-opening campaigns against retailers and designers who still use fur, and we've convinced others to eliminate or pledge never to use fur and exotic skins in their collections. We hold protests and educate the media and the public about the ugly truth behind the fur industry.

Of course, ending this cruel killing of animals will require a sustained and monumental effort. But we're up to the task and hope that you will stand with us.

With your special gift today, you'll help PETA continue to fight against the suffering and abuse of animals wherever and whenever it occurs.

Thank you for everything that you do for animals.
Kind regards,
Gurbinder Sharma
Volunteer PETA INDIA
09876023524





.

HANDS ON SCRIPT

Know your back panel


You’ve probably faced problems when shifting your comp or getting a new peripheral as to which cable goes where and what the empty ports might be for. If you look closer you’ll realise that it’s not as complicated as it seems. The back panel has been built in such a way that each port/ socket is built to accommodate only one connection/ wire … the one that it’s meant to!



A word of advice: Remember not to force any connectors into any of the given ports – they are designed to only go in one way. And if they do not fit easily, you are surely putting the wrong connector in the given slot or vice versa.



So what goes where?



The PS/2 ports for keyboard and mouse

If you look towards the top of the back panel, there are normally two PS/2 ports—one for the keyboard and one for the mouse. The two ports are colour coded, so you cannot mistake one for the other (blue for keyboard and green for the mouse). As a rule of thumb, the PS/2 keyboard port is the lower port while the PS/2 mouse port is above it.



Attaching the non-PS/2 Keyboard

If you don’t have a PS/2 mouse or keyboard, you won’t have any problem recognising the non-PS/2 port for the keyboard. The keyboard fits in properly into the round port provided for it. This port is located near the top of the back panel right below the power connector.



Attaching the mouse

The non-PS/2 mouse fits into what is known as the COM port. You can recognize the COM port by the fact that it has pins in it, so your mouse fits into it properly. You will normally have a 9-pin COM port and a 25-pin COM port. The mouse fits into the 9-pin port. Normally, the port will have an indicator, which will tell you which side to keep up when putting in the mouse cable. In case it doesn’t have an indicator, just check the port so that the five pins above and four pins below (or vice versa) match the holes in the mouse and attach the mouse accordingly.



Attaching the modem

The other COM port with the 25 pins is usually for an external modem. You attach the modem in a similar manner as you would the mouse. You just have to ensure that the 16 pins above and 9 pins below (or vice versa) match the holes in the modem.



Attaching the printer to the parallel port

The printer port or the parallel port as it’s usually called, is the one with 25 holes. You use it for connecting the printer cable (or Zip drive or scanner cable).



Connecting speakers, microphone and joystick

The ports at the bottom are for attaching the speaker connectors and microphone. These wire to the soundcard.

Normally, the soundcard has three small round ports (apart from a game port) to perform specific sound functions. The ports are usually marked as Line Out – To grab sound from the sound card, Line In – For external sound capture from an outside source, and Speakers Out - To connect speakers to the sound card for audio output

Most soundcards these days also have colour-coded ports so you cannot mistake them. Besides, the function of the port is written right next to it.



The game port, which is usually part of the soundcard, could be used to connect gaming peripherals like a ‘Joystick’.



Connecting monitor cable to display adaptor

The isolated port that looks like a narrower version of the parallel port and has three rows of pins, is where you connect the monitor’s cable. An indicator on the monitor cable should say which side is up, so you shouldn’t have any problems with this one either as the plug will only go in one way. This port is situated on the VGA card of the computer.



Like we said earlier, if you look closer, you’ll realise that your computer is more user friendly than you think. The apparent maze of wires on the back panel leads to a simple solution at the end of the hunt

THIN CLIENTS AN OVERVIEW

THIS IS ABOUT THIN CLIENTS :

PERFORMANCE


INSTALLATION


CONFIGURATION


WORTHINESS




Thin Clients are just like normal pc’s but the big difference is the Size & Cost. Thin Clients are cheaper than desktop pc .They are smaller in size than a normal system unit .They are square like boxes mount behind the LCD.

FEATURES: Compact size,No CPU,No Memory,No cooling needs(no Fan inside).

Contains a ethernet connector, keyboard port, mouse port, audio port & USB ports(Optional not in every version),Display adapter and power input with on of off switch.

Seems cool and sound good that buy one high end pc (intel core 2 duo @ 3.4 ghz or higher, ddr ram upto 4gb,high speed ethernet card etc.)

Supported Operating Systems are Win-xp SP3 , win server-2003 , win server small buisness and linux.Installation is preity easy with the cd .

Win-xp SP3 Supports 10 Users accoording to the company specifications and all users must be members of remote desktop users .connectivity is through terminal server services.hence multi user support is necessary. Win Server-2003 supports upto 30 users but main difference is the security/roles /policies to restrict users from unauthenticated services.

PERFORMANCE: I am using enjay thin clients UTS(Ultra Thin Series)without any USB ports.I am not criticized the product but sorry to say , these are not upto the mark every day a new issue arises like connectivity/display/hang up and console is not accept the modifications done by Admin and you are unable to access the Client directly to change any settings.

Update and tech support is very poor devices are made in china so web site is also hosted by chinese kimsen.com .you required to install native support for chinese simplified otherwise you are unable to register online and update your console software. It is not updated since 2008.

Configuration: is easy run console cd and installed the client software it asks you at the end that if you want to Add new users click yes and simply create the users by following on screen instructions.

Uses static ip addresses so no need of dhcp .devices missing the redundency so check your power supplies and back up a little fluctuation can damage the client.

WORTHINESS: AVG. according to me its better to use separate units that run on their own resources and give you less trouble. Cost cutting is not always paying.